PRESSURE GAUGE DN 100 - BH5220 ECO-A57-K102

PRESSURE GAUGE DN 100 - BH5220 ECO-A57-K102 - Labom

Constructional design / case

Design:	High quality case with bayonet ring, material: st.steel mat.-no. 1.4301 (304) ventilation valve, material: PUR
Nominal size:	NS 63 or NS 100
Degree of protection per EN 60529:	IP 65
Case filling:	Glycerine-water (optional) Further liquid fillings upon request.
Atmosph. pressure com-pensation:	Via ventilation valve
Case seal:	Material gasket: NBR
Window:	Non-splintering laminated glass. Option: Non-splintering plastic (Macrolon)
Measuring element:	Bourdon tube - c-type
	NS 63: screwed NS 100: pressure connection weld-ed to process connection
System filling:	Synthetic oil, free of silicone FD1, FDA listed, class USDA-H1
Movement:	stainless steel segment
Scale:	Pure aluminium, white with black inscription. Option: with red marking or with fixed reference pointer Special scale upon request
Pointer:	NS 63: pure aluminium, black NS 100: pure aluminium, black, with micro adjustment for zero point correction
Weights:	NS 63 without filling: approx. 0.5 kg NS 100 without filling: approx. 1.0 kg NS 63 with filling: approx. 0.7 kg NS 100 with filling: approx. 1.3 kg

Process connection

Design:

With internal diaphragm seal, see order details and product group D5

Material wetted parts

Membran:

See order details

Nominal range

See order details,	further ranges upon request
Overload protection:	Standard: 1.3 times

Accuracy

Accuracy class:	per EN 837-1: NS 63: class 1.6 NS 100: class 1.0
Temperature influence:	Max. ± 0,4% / 10K of measuring span per EN 837-1
Process-temperature-influence:	depending on active diaphragm diameter
	dM 22.6…24 mm ≤ 25 mbar / 10 K dM 27…30 mm ≤ 20 mbar / 10 K dM 34…36 mm ≤ 8 mbar / 10 K dM 40…46 mm ≤ 5 mbar / 10 K dM 51…58 mm ≤ 2 mbar / 10 K
	A detailed calculation of accuracy can be submitted upon request.

Hygienic design

The wetted surfaces made of stainless steel are executed according to EHEDG Doc.8 and ASME BPE SF3 (Code: HY).

We guarantee the following surface roughness values: Diaphragm foil: Ra ≤ 0.38 µm Laser welds: Ra ≤ 0.76 µm Turned parts: Ra ≤ 0.76 µm

Further versions of hygienic design upon request.

Autoclav. design: Autoclavable without case filling, only. Please remove the Elastomer filling plug before autoclaving.

Temperature ranges

Temperature ranges for the design of the diaphragm seal system (in combination with the pressure transmission fluid FD1):

Ambient without filling: -10…50 °C Ambient with filling: -10…50 °C Media without filling: -10…140 °C Media with filling: -10…140 °C

Adjusted design temperature ranges within the following maximum values are possible on request: Ambient without filling: -20…60 °C Ambient with filling: -20…60 °C

Option: Autoclave temperature: 130 °C for 1 hour (without filling)

Storage without filling: -20…60 °C Storage with filling: -20…60 °C

Extended temperature range (-20...60 °C) optional.

The maximum values can be restricted by the following parameters:

- diaphragm size - measuring range - pressure transmission fluid

#LABO00000033 #labom #donghodoapsuat #apsuatke #thietbicongnghiep #vait #vieta #BOURDONTUBEPRESSUREGAUGE